Professional Solutions
Home
Mobile Compressors
Stationary Compressors
Professional Solutions
Stationary Screw
Stationary Compressors
Stationary Screw
Stationary Screw
Stationary Screw
Stationary Compressors
Screw Compressors
Professional Solutions
Screw Compressors
Screw Compressors
Screw Compressors
Special Design
Professional Solutions
Special Design
Special Design
Professional Solutions
Professional Solutions
E-service-direct-driven-top-banner

E-service for Direct Driven compressors

ONLINE SERVICE SOLUTIONS. TAKE CARE OF YOUR AIR COMPRESSOR

Follow our E-Service guides to setup your compressor and perform maintenance tasks. Easy steps explained in our video guides will allow you to extend the life of the product and keep its performance always satysfying. How to carry out a specific operation? How to assembly that piece? Where to find the nearest air compressor service center?

Setup

How to set up an ABAC direct-driven air compressor.

Warning: unbox the compressor and make sure it is in perfect condition, checking if it was damaged during the transport. Carry out the operations as showed.

Loading...

Start

The compressor is fully automatic and is controlled by the pressure switch, which stops it when tank pressure reaches maximum value and restarts it when it falls below a minimum value.

Warning: Check that the mains power matches that indicated on the electrical data-plate

Loading...

Vessel draining

The compressor generates condensate water which accumulates in the tank. The condensate in the tank must be drained at least once a week, by opening the drain tap under the tank.

Warning: Take care if there is compressed air inside the cylinder, and water could flow out with considerable force. Condensate of oil lubricated compressors must not be drained into the sewer or dispersed in the environment as it contains oil. Dispose of it accordingly.

Loading...

Oil change

The compressor is filled with original oil. We recommend a full change of oil in the pumping element within the first 100 hours of duty.

Warning: do not drain used oil into the sewer or dispose of it in the environment.

Loading...

Air filter cleaning

Every 50 hours of duty we advise you to dismantle the suction filter and clean the filtering element by blowing compressed air on it (fig. 24). You are recommended to replace the filter element at least once if the compressor operates in a clean environment, but more frequently if in a dusty environment.

Loading...

ABAC OS SUPER SILENT

SET UP Abac OS Super Silent air compressors

Loading...

START Abac OS Super Silent range

Loading...

Abac OS Super Silent - drain condensate

Loading...

Abac OS Super Silent - clean air filter

Loading...

Abac OS Super Silent - air filter and chack valve replacement

Loading...